Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

Brocade Network Advisor SAN User Manual 241
53-1002167-01
SMI Agent configuration
9
4. Click Apply.
NOTE
Changes on this tab take effect after the next CIMOM server restart.
NOTE
You can only restart the server using the Server Management Console (Start > Programs >
Management_Application_Name 11.X.X > Server Management Console).
If you disabled SSL, a confirmation message displays. Click Yes to continue.
5. Click Close to close the SMIA Configuration Tool dialog box.
Configuring the Bind Network Address
NOTE
You must have SAN - SMI Operation Read and Write privileges to view or make changes on the
CIMOM tab.
To configure the network bind address, complete the following steps.
1. Click the CIMOM tab.
2. Select a network address from the IP Configuration Bind Network Address list to which you
want to bind the CIMOM server.
The default network address is the host system name.
3. Click Apply.
NOTE
Changes on this tab take effect after the next CIMOM server restart.
NOTE
You can only restart the server using the Server Management Console (Start > Programs >
Management_Application_Name 11.X.X > Server Management Console).
4. Click Close to close the SMIA Configuration Tool dialog box.