Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

Brocade Network Advisor SAN User Manual 253
53-1002167-01
Configuration repository management
10
3. Set the Schedule parameters. These include the following:
- The desired Frequency for backup operations (daily, weekly, monthly).
- The Day you want back up to run.
If Frequency is Daily, the Day list is grayed out.
If Frequency is Weekly, choices are days of the week (Sunday through Saturday).
If Frequency is Monthly, choices are days of the month (1 through 31).
- The Time (hour, minute) you want back up to run.
- The maximum age allowed before you Purge Backups.
The number of purge days should be at least one day more than the selected backup
frequency.
The backup purge thread runs every day at 12:30 PM and deletes all back up
configurations that exceed the maximum age allowed.
4. Choose one of the following options to determine the scope of the backup.
• Select the Backup all fabrics check box, if necessary, to back up all switch configurations
of discovered switches in all fabrics
• Clear the Backup all fabrics check box and select the specific fabric check boxes in the
Selected Fabrics table to back up individual fabrics.
If any switches do not have the EGM license, a messages displays. Click OK to enable
backup on the switches with the EGM license.
5. Click OK.
Click OK on the confirmation message.