Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

264 Brocade Network Advisor SAN User Manual
53-1002167-01
Properties
10
Properties
You can customize the device and fabric Properties dialog boxes to display only the data you need
by adding, editing, and deleting property labels. You can also edit property fields to change
information.
Viewing Fabric properties
To view the properties for a fabric, complete the following step.
1. Right-click any fabric and select Properties.
The Fabric_Name Properties dialog box displays, with information related to the selected
fabric.
2. Click OK on the Fabric_Name Properties dialog box to close.
TABLE 16 Fabric properties
Field/Component Description
Name
The name specified through the switch Element Manager.
FID Fabric Name
Enter a name for the fabric (up to 128 characters).
Supported on seed switches running Fabric OS 7.0 or later.
Seed Switch
The IP address of the seed switch.
AD Enabled
Whether admin domain is enabled on the switch or not.
Status
The operational status.
Switch and AG Count
The number of switches and Access Gateway’s in the fabric.
Description
A description of the customer site.
Principal Switch
The IP address of the principal switch.
Active Zone Configuration
Whether active zone configuration is activated on the fabric.
Last Discovery
The date and time of last discovery.
Tracked
Whether the fabric is tracked.
Location
The customer site location.
Contact
The primary contact at the customer site.