Manualshelf

Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

ManualsBrandsHP ManualsSoftwareHP B-series SAN Network Advisor Software
321322323324325326327328329330
284 Brocade Network Advisor SAN User Manual
53-1002167-01
Ports
10
Viewing port optics
NOTE
QSFP ports do not display in the Port Optics dialog box.
To view port optics, complete the following steps.
1. Right-click the switch for which you want to view port optic information on the Connectivity Map
and select Port Optics (SFP).
The Port Optics (SFP) dialog box displays(Figure 104).
FIGURE 104 Port Optics dialog box
2. Review the port optics information.
• Combined Status—Displays the current status of the port.
NOTE
Requires a 16 Gbps capable port running Fabric OS 7.0 or later.
NOTE
The device must have a Fabric Watch license and threshold monitoring configured for the
port. For more information, refer to the Fabric Watch Administrator’s Guide.
If the port is online and port monitoring is active, displays the current status of the port
based on these five parameters: Transceiver Temp (C), Rx Power, Tx Power, Transceiver
Current (mAmps), and Voltage (mVolts).
If the port is offline, displays the current status of the port based on these two parameters:
Transceiver Temp (C) and Voltage (mVolts).