Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

Brocade Network Advisor SAN User Manual 287
53-1002167-01
Port Auto Disable
10
Viewing the port auto disable status
NOTE
The device must be running Fabric OS 6.3 or later.
To view the port auto disable status, complete the following steps.
1. Select Configure > Port Auto Disable.
The Port Auto Disable dialog box displays.
FIGURE 105 Port Auto Disable dialog box
2. Select one of the followingfrom the Show list to determine what ports to display:
• All Ports (default)
• Disabled PAD Ports
• Enabled PAD Ports
• Blocked Ports
3. Review the port status and other information:
• Products/Ports tree—Displays devices and associated ports. Also, displays a Warning icon
for blocked FC ports (displayed with the port icon).
• Port Auto Disable—Displays whether Port Auto Disable is currently enabled or disabled.
• Port Block Status—Displays whether the port is currently blocked.