Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

292 Brocade Network Advisor SAN User Manual
53-1002167-01
Port Auto Disable
10
Unblocking ports
NOTE
The device must be running Fabric OS 6.3 or later.
To unblock ports, complete the following steps.
1. Select Configure > Port Auto Disable.
The Port Auto Disable dialog box displays.
2. Select the fabric on which you want to enable port auto disable (PAD) from the Fabric list.
3. Select Blocked Ports from the Show list.
4. Click Unblock.
5. Click OK on the Port Auto Disable dialog box.