Manualshelf

Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

ManualsBrandsHP ManualsSoftwareHP B-series SAN Network Advisor Software
341342343344345346347348349350
Brocade Network Advisor SAN User Manual 301
53-1002167-01
Unassigning a storage port from a storage array
12
Unassigning a storage port from a storage array
To unassign a storage port from a storage array, complete the following steps.
1. Open the Storage Port Mapping dialog box by performing one of the following actions:
- Select a storage port icon in the topology view, then select Discover > Storage Port
Mapping.
- Right-click any storage port icon in the topology view and select Storage Port Mapping.
- Right-click any storage port in the Device Tree and select Storage Port Mapping.
The Storage Port Mapping dialog box displays.
2. Select the storage port you want to unassign from the Storage Array list.
3. Click the left arrow button.
The selected storage port is removed from the Storage Array list and added to the Storage
Ports table.
4. Click OK to save your work and close the Storage Port Mapping dialog box.
Reassigning mapped storage ports
To reassign a storage port, complete the following steps.
1. To open the Storage Port Mapping dialog box, choose from one of the following approaches.
- Select a storage port icon in the topology view, then select Discover > Storage Port
Mapping.
- Right-click any storage port icon in the topology view and select Storage Port Mapping.
- Right-click any storage port in the Device Tree and select Storage Port Mapping.
The Storage Port Mapping dialog box displays.
2. Select the storage port you want to unassign from the Storage Array list.
3. Click the left arrow button.
The selected storage port is removed from the Storage Array list and added to the Storage
Ports table.
4. Make sure the storage port you want to reassign is still selected.
5. Select the storage array to which you want to reassign the storage port in the Storage Array list.
6. Click the right arrow button.
The storage port moves from the Storage Ports table to the selected storage array.
7. Cl ic k OK to save your work and close the Storage Port Mapping dialog box.