Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

Brocade Network Advisor SAN User Manual 317
53-1002167-01
Adapter software
13
Importing a boot image into the repository
To import boot images into the Management application, perform the following tasks.
1. From the Boot Image Management dialog box, click the Repository button.
The Boot Image Repository dialog box, shown in Figure 110, displays.
FIGURE 110 Boot Image Repository dialog box
2. Click Import on the Boot Image Repository dialog box.
3. The Import Boot Image dialog box displays.
4. Locate the boot image file using one of the following methods:
• Search for the file you want from the Look In list. Boot image files version 2.0.0.0 and
2.1.0.0 are .zip files and other boot image files are tar files.
• Enter the name of the image file you want to import in the File Name field.
5. Click Open.
After the import completes successfully, you see a message that the boot image imported
successfully.
NOTE
The boot image file is imported to Install_Server_Home/data/adapter_boot_images.
6. Click OK.