Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

Brocade Network Advisor SAN User Manual 331
53-1002167-01
VM Manager
13
3. Select the WWN row you want to move by right-clicking it, select the Copy Row option, and
paste the contents into a text editor.
4. Select an online AG FAWWN row and click the Delete button.
5. Select a switch from the Switch list and click Add to launch the Add AG Fabric Assigned WWN
Configuration dialog box.
6. Using the information you copied to the text editor, configure the AG port WWN information to
be moved to the selected switch.
7. Cl ic k OK.
The specified AG FAWWN row is added to the new switch.
VM Manager
A vCenter server can be discovered by adding a VM Manager tor to the Management application.
See “VM Manager Discovery” on page 75 for information about discovering VM Managers.
Adding a VM Manager
1. Click Add on the Discover VM Managers dialog box.
The Add VM Manager dialog box displays.
FIGURE 115 Add VM Manager dialog box
2. Enter the IP address or host name of the VM Manager (VMM) into the Network Address text
box. The maximum number of supported characters is 256.
3. Enter the VMM server port number into the Port text box. The valid port number range is 0
through 65536.
4. Enter the user ID into the User ID text box to identify the user of the VMM. The maximum
number of supported characters is 64.
5. Enter the password into the Password text box. The maximum number of supported characters
is 64.