Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

Brocade Network Advisor SAN User Manual 339

53-1002167-01

Switch policies

Opening the DCB Configuration dialog box

Launch the DCB Configuration dialog box using one of the following methods:

• Select Configure > DCB from the menu bar.

• Right-click the DCB switch from the device tree, and select Configure > DCB.

• Right-click the DCB switch from the topology map and select Configure > DCB.

The DCB Configuration dialog box displays, showing the status of all DCB-related hardware and

functions.

NOTE

The Protocol Down Reason column displays the values only for the external ports of embedded

platforms but not for the internal ports.

FIGURE 117 DCB configuration dialog box

Minimum DCB configuration for FCoE traffic

You must complete the following procedures to create the basic configuration of DCB for FCoE

traffic.

This section is applicable for the following Fabric OS (FOS) versions: 6.3.0, 6.3.1, 6.3.2, 6.4.1, and

6.4.2. This section is not applicable for FOS versions 6.3.1_dcb, 6.3.1_cee, 6.4.1_fcoe, or 7.0.0.

NOTE

The first two procedures in this section can be completed as a single procedure. They were broken

into two separate procedures for clarity.