Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

Brocade Network Advisor SAN User Manual 359

53-1002167-01

FCoE provisioning

FIGURE 126 QoS, assign a traffic class map to a port dialog box

4. Click the Assign a map check box.

5. Select Traffic Class in the Map Type list.

6. Select a Traffic Class Map in the Traffic Class Map list.

7. When you have finished the configuration, click OK to launch the Deploy to Ports/LAGs dialog

box. Refer to “Product, Port, and LAG Deployment” on page 373 for more information.

FCoE provisioning

The Management application supports FCoE provisioning only on Fabric OS (FOS) version

6.3.1_dcb. However, the Brocade command line interface supports FCoE provisioning for the

following versions of FOS: FOS 6.3.1_cee, FOS 6.4.1_fcoe, and FOS 7.0.0. Refer to the Fabric OS

Command Reference Manual for CLI procedures.

FCoE provisioning simplifies the number of steps required to configure a DCB port to carry the FCoE

traffic. The FCoE map contains the default DCB Map and the VLAN ID. You can change the default

VLAN ID using the FCoE tab of the Edit Switch dialog box, shown in Figure 127.

NOTE

The default DCB map associated with the default FCoE map can be edited on the switch from the

QoS tab.