Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

360 Brocade Network Advisor SAN User Manual
53-1002167-01
FCoE provisioning
14
Changing the VLAN ID on the default FCoE map
You can change the VLAN ID on the default FCoE map only when no ports or LAGs are participating
as members of the switch. You must first manually remove the FCoE Map option for each of the
port members before you change the VLAN ID on the switch.
1. Select Configure > DCB from the menu bar.
The DCB Configuration dialog box displays, showing the status of all DCB-related hardware and
functions.
2. Select a switch and click Edit.
3. Click the FCoE tab on the Edit Switch dialog box.
The Edit Switch dialog box, FCoE tab displays, as shown in Figure 127.
FIGURE 127 Edit Switch dialog box - FCoE tab
4. Accept the default VLAN ID of 1002, or change the value. The valid VLAN ID range is from 2
through 3583.
5. Click the right arrow button to move the FCoE map parameters into the FCoE Maps list.
6. When you have finished the configuration, click OK to launch the Deploy to Products dialog
box.
7. Cl ic k OK after changing the attributes of the current deployment.
The Deployment Status dialog box launches.
8. Click Start on the Deployment Status dialog box to save the changes to the selected devices.