Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

382 Brocade Network Advisor SAN User Manual
53-1002167-01
FCoE login groups
14
7. Cl ic k OK.
The FCoE Login Group Confirmation and Status dialog displays.
8. Review the changes carefully before you accept them.
9. Click Start to apply the changes, or click Close to abort the operation.
On closing the FCoE Login Group Confirmation and Status dialog box, the FCoE Configuration
Dialog refreshes the data and the latest information is displayed.
• “FCoE login groups”
Editing an FCoE login group
Complete the following steps to edit the name of a login group. You can manually add ports by
entering the world wide name (WWN) or select available managed CNAs from all discovered hosts.
Only directly-connected devices are supported.
1. Select Configure > FCoE from the menu bar.
or
Right-click the DCB device and select FCoE.
2. Select a group from the Login Groups list and click Edit.
The Edit Login Group dialog box, shown in Figure 141, displays.
FIGURE 141 Edit Login Group dialog box