Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

Brocade Network Advisor SAN User Manual 399
53-1002167-01
Layer 2 access control list management
15
3. Click Yes on the confirmation message.
4. Click OK on the Device_Name - L2 ACL Configuration dialog box.
NOTE
The L2 ACL configuration is not deleted from the switch until you deploy the configuration to
the switch.
The Deploy to Products - L2 ACL dialog box displays. To save the configuration, refer to “Saving
a security configuration deployment” on page 402
Deleting a L2 ACL configuration from the switch
To delete a L2 ACL configuration from the switch, complete the following steps.
1. Select the device and select Configure > Security > L2 ACL > Product.
The Device_Name - L2 ACL Configuration dialog box displays.
2. Select the Incremental option as the configuration type.
3. Select Delete from the Operation list for the L2 ACL configuration you want to delete.
4. Click OK on the Device_Name - L2 ACL Configuration dialog box.
NOTE
The L2 ACL configuration is not deleted from the switch until you deploy the configuration to
the switch.
The Deploy to Products - L2 ACL dialog box displays. To save the configuration, refer to “Saving
a security configuration deployment” on page 402