Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

Brocade Network Advisor SAN User Manual 437
53-1002167-01
Smart card usage
18
6. Store the card in a secure location, not in proximity to the switch or blade.
Deregistering a system card
System cards can be removed from the database by deregistering them. Use the following
procedure to deregister a system card:
1. Select Configure > Encryption from the menu task bar.
The Encryption Center dialog box displays (Figure 153).
2. Select the switch from the Encryption Center Devices table, then select Switch > System Cards
from the menu task bar, or right-click the switch and select System Cards.
The System Cards dialog box displays (Figure 158).
3. Select the system card to deregister.
4. Click Deregister.
5. A confirmation dialog box displays. Click OK to confirm deregistration.
The card is removed from the Registered System Cards table.
Tracking smart cards
Use the Smart Card Tracking dialog box to track smart card details.
1. From the Encryption Center, select Smart Card > Smart Card Tracking.
The Smart Card Asset Tracking dialog box displays (Figure 159).
FIGURE 159 Smart Card asset tracking dialog box