Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

438 Brocade Network Advisor SAN User Manual

53-1002167-01

Smart card usage

2. Select a smart card from the table, then do one of the following:

• Click Delete to remove the smart card from the Management application database.

Deleting smart cards from the Management application database keeps the Smart Cards

table at a manageable size, but does not invalidate the smart card. The smart card can

still be used. You must deregister a smart card to invalidate its use.

The Delete operation applies only to recovery cards.

• Click Save As to save the entire list of smart cards to a file. The available formats are

comma-separated values (.csv) and HTML files (.html).

Editing smart cards

Use the Edit Smart Card dialog box to edit smart card details.

1. From the Encryption Center dialog box, select Smart Card > Edit Smart Card from the menu

task bar.

The Edit Smart Card dialog box displays (Figure 160).

FIGURE 160 Edit Smart Card dialog box

2. Insert the smart card into the card reader.

3. After the card’s ID is displayed in the Card ID field, enter the Card Password, then click Login.

4. Edit the card assignment user information as needed.

5. Click OK.