Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

468 Brocade Network Advisor SAN User Manual
53-1002167-01
Steps for connecting to a TEMS appliance
18
4. In the user table under the Certificate column, click the pen icon for the newly created user.
The Sign Certificate Request page displays.
5. Enter the CSR file name exported from the switch in the From File box, or if you copied the CSR
from Switch > Properties, paste the CSR file contents to the From Text box.
6. Click Sign.
7. Under the Certificate column, click the export icon (globe with an arrow).
A file save dialog displays.
8. Click Save and enter the destination location for this signed certificate. Save the certificate
with a Privacy Enhanced Mail (.pem) extension.
9. Perform the above steps for both the primary and secondary key vaults using the same user
name, password, and group.
Importing a signed KAC certificate into a switch
After a KAC CSR has been submitted and signed by a CA, the signed certificate must be imported
into the switch.
1. From the Encryption Center, select Switch > Import Certificate.
The Import Signed Certificate dialog box displays (Figure 173).
FIGURE 173 Import Signed Certificate dialog box
2. Browse to the location where the signed certificate is stored.
3. Click OK.
The signed certificate is stored on the switch.