Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

546 Brocade Network Advisor SAN User Manual
53-1002167-01
Master keys
18
4. Choose the active or alternate master key for restoration, as appropriate. Refer to “Active
master key” on page 540 and “Alternate master key” on page 540 if you need more
information on active and alternate master keys.
5. Select File as the Restore From location.
6. Enter a file name, or browse to the desired location.
7. Enter the passphrase. The passphrase that was used to back up the master key must be used
to restore the master key.
8. Click OK.
Restoring a master key from a key vault
Use the following procedure to restore the master key from a key vault:
1. Select Configure > Encryption from the menu task bar.
The Encryption Center dialog box displays (Figure 153).
2. Select a group from the Encryption Center Devices table, then select Group > Security from the
menu task bar, or right-click a group and select Security.
The Encryption Group Properties dialog box displays with the Security tab selected.
3. Select Restore Master Key as the Master Key Action.
The Restore Master Key for Encryption Group dialog box displays (Figure 254).
FIGURE 254 Select a Master Key to Restore (from key vault) dialog box
4. Choose the active or alternate master key for restoration, as appropriate. Refer to “Active
master key” on page 540 and “Alternate master key” on page 540 if you need more
information on active and alternate master keys.
5. Select Key Vault as the Restore From location.