Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)
566 Brocade Network Advisor SAN User Manual
53-1002167-01
Viewing and editing group properties
18
General tab
The General tab (Figure 269) is viewed from the Encryption Group Properties dialog box. To access
the General tab, select a group from the Encryption Center Devices table, then select Group >
Properties from the menu task bar, or right-click a group and select Properties.
NOTE
You can also select a group from the Encryption Center Devices table, then click the Properties icon.
FIGURE 269 Encryption Group Properties dialog box - General tab
The General tab displays the following properties:
• Encryption group name - the name of the encryption group.
• Group status - the status of the encryption group, which can be OK-Converged or Degraded.
Degraded means the group leader cannot contact all of the configured group members.
• Deployment mode - the group’s deployment mode, which is transparent.
• Failback mode - The group’s failback mode, which can be automatic or manual. The failback
mode can be changed by clicking on the field and selecting the desired mode.
• Key vault - the vault type, either RSA Key Manager (RKM) NetApp Lifetime Key Manager (LKM),
HP Secure Key Manager (SKM), Thales Encryption Manager for Storage (TEMS), or Tivoli Key
Lifetime Manager (TKLM).
• REPL Support - whether or not remote replication LUNs support is enabled or disabled. You can
change the current setting by clicking on the field and selecting the desired state.
• Primary Key Vault IP address - The IP address of the primary key vault, either IPv4 or host
name.
• Primary Key Vault Connection Status - the status of the connection to the primary key vault. In
an operating environment, the status should be Connected.
• Backup key vault IP address - the IP address of the backup key vault.