Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

592 Brocade Network Advisor SAN User Manual
53-1002167-01
Zoning configuration
19
4. Click Export.
The Export Alias dialog box displays.
5. Browse to the location to which you want to export the zone alias data.
6. Enter a name for the export file in the File Name field.
7. Cl ic k Export Alias.
8. Click OK or Apply on the Zoning dialog box to save your changes.
Renaming a zone alias
1. Select Configure > Zoning > Fabric.
The Zoning dialog box displays.
2. Click the Zone DB tab if that tab is not automatically displayed.
3. Select Alias from the Type list.
4. Right-click the zone alias you want to rename and select Rename.
5. Edit the name and press Enter.
6. Click OK or Apply on the Zoning dialog box to save your changes.
Creating a zone configuration
1. Select Configure > Zoning > Fabric.
The Zoning dialog box displays.
2. Click the Zone DB tab if that tab is not automatically displayed.
3. Select an FC fabric from the Zoning Scope list.
This identifies the target entity for all subsequent zoning actions and displays the zoning
database for the selected entity.
4. Click New Configuration.
A new configuration displays in the Zone Configurations list.
5. Enter a name for the zone configuration.
For zone name requirements and limitations, refer to “Zoning naming conventions” on
page 581.
6. Press Enter.
Depending on the characters included in the name you enter, a message may display informing
you the name contains characters that are not accepted by some switch vendors, and asking
whether you want to proceed. Click Yes to continue, or No to cancel the zone creation.