Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

Brocade Network Advisor SAN User Manual 787
53-1002167-01
SAN Historical performance data
27
Enabling historical performance collection for selected fabrics
To enable historical performance collection for selected fabrics, complete the following steps.
1. Select Monitor > Performance > Historical Data Collection > Enable Selected.
The Historical Data Collection dialog box displays.
FIGURE 345 Historical Data Collection dialog box
2. Select the fabrics for which you want to collect historical performance data in the Available
table.
NOTE
Devices with 10GE ports must be running Fabric OS 6.4.1ltd or later to obtain the correct
TE port statistics (TX/RX).
3. Click the right arrow to move the selected fabrics to the Selected table.
4. Select the Include newly discovered fabrics check box to automatically add all newly
discovered fabrics to the Selected table.
5. Click OK.
Historical performance data collection is enabled for all selected fabrics.
Disabling historical performance collection
To disable historical performance collection on all fabrics, select Monitor > Performance >
Historical Data Collection > Disable All.
Historical performance data collection is disabled for all fabrics in the SAN.