Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

848 Brocade Network Advisor SAN User Manual
53-1002167-01
Defining filters
30
d. Click the right arrow button to move the event type to the Additional Filters - Include these
Events list.
e. To add additional filters, repeat step a through step d.
8. To exclude events from the event filter, complete the following steps.
NOTE
You can configure a maximum of ten filters to be included.
a. Select the event type you want to remove from the Event Category list.
All event types are listed in alphabetical order.
b. Select the event column for the event from the Event Column list.
All event columns are listed in alphabetical order.
c. Enter all or part of the event type value in the Value Contains field.
d. Click the right arrow button to move the event type to the Additional Filters - Exclude these
Events list.
e. To remove additional filters, repeat step a through step d.
9. To display an available event action, select the event action from the Available Event Action list
and click the right arrow button to move it to the Selected Event Action to be displayed list.
10. Click OK.
The Define Filter dialog box displays.
11. Click OK to close Define Filter dialog box.
Viewing events
The All Events dialog box enables you to view all events that have occurred on the selected switch,
even events that were filtered using advanced filtering criteria.
To view events for a selected device, complete the following steps.
1. Right-click a switch from the device tree or connectivity map.
2. Select Events from the list.
The All Events dialog box displays.