Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

Brocade Network Advisor SAN User Manual 863
53-1002167-01
Syslogs
30
5. If the trap has been customized, a button labeled Default is availab.e. Click Default to revert
the previous changes to its default.
Syslogs
Use the Options dialog box to automatically register the Management application server as the
syslog recipient on all managed SAN and IP products. The syslog listening port number is 514 by
default. If you change the port number from 514, auto-registration is disabled.
Adding a syslog recipient
1. Select Monitor > Syslog Configuration > Product Syslog Recipients.
The Syslog Recipients dialog box, shown in Figure 380, displays.
FIGURE 380 Syslog Recipients dialog box
2. Select Add from the Action list.
3. Enter the IP address of the syslog port (the recipient server) in the Recipient IP Address field.
This is a mandatory field. IPv4 addresses are accepted but a DNS name is not accepted.
4. Enter the syslog port of the recipient in the Recipient Port field. The default value is 514. Valid
numeric values range from 1 through 65535.
5. Select the fabric or switches from the Available list and click the right arrow button to move it to
the Selected list. You can select multiple products.
NOTE
For IP products, only switches are available to select.
6. Click OK.
The Management application registers the recipient IP address as a syslog recipient.