Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

Brocade Network Advisor SAN User Manual 871
53-1002167-01
Event action definitions
30
5. Select the event senders you want from the Available Sources list, then click the right arrow
button to move them in the Selected Sources box.
NOTE
The selected source count cannot exceed 100.
6. If you selected a product group or port group as event senders, select one of the following
group members:
NOTE
The Selected Product/Port Group members treated as parameter is not available if you
selected Use Ifindex in source matching (step ).
• Individual: Each member of the group will be treated as an individual entity by the Event
Actions runtime engine as it monitors the specified event. The action is applied individually
to products, access points, and sensors. For example, a policy is to be applied when two
link down traps occur. If Product A and Product B both send link down traps, the policy will
not be applied. The policy will be applied if Product A sends two link down traps.
• One Entity: The entire group will be treated as one entity by the Event Actions runtime
engine as it monitors the specified event. The action is applied to the entire group. For
example, a policy is to be applied when two link down traps occur. If Product A and Product
B both send link down traps, the policy will be applied. If Product A sends two link down
traps, the policy is applied. It will also be applied if Product B sends two link down traps.
7. Cl ic k Next.
The Policy pane of the Add Event Action dialog box displays. Proceed to “Configuring event
action policies”.