Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

Brocade Network Advisor SAN User Manual 903

53-1002167-01

Event logs

You can view all events that take place through the Master Log at the bottom of the main window.

You can also view a specific log by selecting an option from the Monitor menu’s Logs submenu. The

logs are described in the following list:

• Audit Log. Displays all ‘Application Events’ raised by the application modules and all Audit

Syslog messages from the switches and Brocade HBAs.

• Product Event Log. Displays all ‘Product Event’ type events from all discovered switches and

Brocade HBAs.

• Fabric Log. (SAN only) Displays ‘Product Events’, ‘Device Status’, and ‘Product Audit’ type

events for all discovered fabrics.

• FICON Log. Displays all the ‘RLIR’ and ‘LRIR’ type events, for example, ‘link incident’ type

events.

• Product Status Log. (SAN only) Displays events which indicate a change in Switch Status for all

discovered switches and Brocade HBAs.

• Security Log. Displays all security events for the discovered switches.

• Syslog Log. Displays syslog messages from switches and HBAs.

The Management application also has an event notification feature. By configuring event

notification, you can specify when the application should alert you of an event. For details, refer to

“Configuring e-mail notification” on page 844.

For information about the Master Log interface, fields, and icons, refer to “Master Log” on page 14.

Viewing event logs

You can view log data through the Master Log on the main window. However, if you want to see only

certain types of events, for example only security events, open a specific log through the Logs

dialog box.

NOTE

You can also launch the Fabric logs and the Product Status logs from the Status bar.

To view a log, complete the following steps.

1. Select Monitor > Logs > <Log_Type>.

The <Log_Type> Logs dialog box displays the kind of log you selected.

2. Review the information in the log.

3. Click Close.