Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

908 Brocade Network Advisor SAN User Manual
53-1002167-01
Event logs
30
5. Click Save.
All data and column headings are exported to the text file.
6. Click Close to close the dialog box.
Filtering events in the Master Log
You can filter the events that display in the Master Log on the main window. By default, all event
types display in the Selected Events table.
For more information about the Master Log, refer to “Master Log” on page 14.
NOTE
The e-mail filter in the Management application is overridden by the firmware e-mail filter. When the
firmware determines that certain events do not receive e-mail notification, an e-mail is not sent for
those events even when the event type is added to the Selected Events table in the Define Filter
dialog box.
To filter events, complete the following steps.
1. Click Filter in the Master Log.
The Define Filter dialog box displays.
2. Select from the following to include or exclude products.
• To include an event type in the filter, select the event from the Available Products list and
click the right arrow.
• To exclude an event type from the filter, select the event from the Selected Products to be
displayed list and click the left arrow.
3. Select from the following to include or exclude event types.
• To include an event type in the filter, select the event category from the Available Event
Category list and click the right arrow.
• To exclude an event type from the filter, select the event from the Selected Event Category
and Severity to be displayed list and click the left arrow.
4. From the Selected Event Category and Severity to be displayed list, select one of the following
severity levels to assigned to the selected event action:
• Emergency
• Alert
• Critical
• Errors
• Warning
• Notice
• Info
• Debug
• Unknown
Clear the severity level check boxes to turn off the filter for the selected events.
5. Click OK.