Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

Brocade Network Advisor SAN User Manual 919
53-1002167-01
Upload failure data capture
31
3. Click Delete.
4. Click OK on the Technical Support Repository dialog box.
Upload failure data capture
You can use upload failure data capture to enable, disable, and purge failure data capture files as
well as configure the FTP Host for the switch.
NOTE
Upload failure data capture is only supported on Fabric OS devices.
Enabling upload failure data capture
1. Select Monitor > Technical Support > Upload Failure Data Capture.
The Upload Failure Data Capture dialog box displays.
FIGURE 405 Upload Failure Data Capture dialog box
2. Select a one or more devices on which you want to enable automatic trace dump from the
Available Switches with Upload Failure Data Capture Disabled table.
3. Click the right arrow button.
The selected devices move from the Available Switches with Upload Failure Data Capture
Disabled table to the Switches with Upload Failure Data Capture Enabled table.
4. Click OK on the Upload Failure Data Capture dialog box.
5. Click OK on the confirmation message, if necessary.