Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

Brocade Network Advisor SAN User Manual 939
53-1002167-01
SAN main menus
A
Fabric Watch. Select to manage fabric watch.
Configure. Select to launch Fabric Watch.
Port Fencing. (Trial and Licensed version Only) Select to
configure port fencing to protect your SAN from repeated
operational or security problems experienced by ports.
Frame Monitor. Select to configure frame monitors.
Performance Thresholds. (Trial and Licensed version
Only) Select to monitor thresholds.
Technical Support. Select to configure technical support
data.
SupportSave. Select to capture server and client support
data.
Product/Host SupportSave. (Fabric OS devices only)
Select to configure technical support data collection.
Upload Failure Data Capture. Select to configure capture
failure data for Fabric OS devices.
View Repository. Select to view repository data.
Event Notification. Select to configure the Management
application to send event notifications at specified time
intervals.
E-mail. Select to configure the Management application
to send event notifications through e-mail.
Call Home. (Trial and Licensed version Only) Select to
configure the Management Server to automatically dial-in
to or send an E-mail to a support center to report system
problems.
Event Processing. Select to configure event processing.
Pseudo Events. Select to configure pseudo events.
Event Actions. Select to configure events actions.
SNMP Setup. Select to configure SNMP traps.
Trap Forwarding. Select to configure trap forwarding.
Product Trap Recipients. Select to register a host as a
trap recipient.
Event Reception. Select to configure the server to accept
or drop traps and specify SNMP credentials and
community strings, which are required to decode traps on
receiving them.
Informs. Select to enable or disable SNMP informs on the
device.
Syslog Configuration. Select to configure Syslog for the
Management server.
Syslog Forwarding. Select to configure Syslog forwarding.
Product Syslog Recipients. Select to register a host as a
syslog recipient.
Menu Command Command Options