Data Center Fabric Manager Enterprise User Manual v10.3.X (53-1001357-01, November 2009)

DCFM Enterprise User Manual 87

53-1001357-01

Assigning a device to the call home center

Discovered devices (switches, routers, and directors) are not assigned to a corresponding call

home center automatically. You must manually assign each device to a call home center before you

use call home.

To assign a device or multiple devices to a call home center, complete the following steps.

1. Select Monitor > Event Notification > Call Home.

The Call Home dialog box displays.

2. Select the devices you want to assign to a call home center in the Products List table.

3. Select the call home center to which you want to assign the devices in the Call Home Center

table.

You can only assign a device to one call home center at a time.

If you do not select a call home center, the selection defaults to the first call home center in the

Call Home Center table.

If you have made a previous selection on an assigned device or filter and you do not select a

call home center, the selection defaults to the previous selection’s call home center.

4. Click the right arrow button.

The selected devices display beneath the selected call home center. Devices assigned to a call

home center do not display in the Products List table.

5. Click OK to close the Call Home dialog box.

Removing a device from a call home center

To remove a device or multiple devices from a call home center, complete the following steps.

1. Select Monitor > Event Notification > Call Home.

The Call Home dialog box displays.

2. Select the call home center from which you want to remove devices in the Call Home Center

table.

3. Select the devices you want to remove from the selected call home center.

4. Click the left arrow button.

A confirmation message displays.

5. Click OK.

The selected devices are removed from the call home center and display in the Products List

table.

6. Click OK to close the Call Home dialog box.