Data Center Fabric Manager Enterprise User Manual v10.3.X (53-1001357-01, November 2009)

112 DCFM Enterprise User Manual
53-1001357-01
Adding a name to a new device
3
Adding a name to a new device
To add a new device and name it, complete the following steps.
1. Select Configure > Names.
The Configure Names dialog box displays.
2. Enter the WWN of the device in the Detached WWN field.
3. Enter a name for the device in the Name field.
4. Click Add.
The new device displays in the table.
If you set names to be unique on the Options dialog box and the name you entered already
exists, a message indicating the name already in use displays. Click OK to close the message
and change the name.
5. Click OK to close the Configure Names dialog box.
6. Click OK on the confirmation message.
Removing a name from a device
1. Select Configure > Names.
The Configure Names dialog box displays.
2. In the Display table, select the name you want to remove.
3. Click Remove.
An application message displays asking if you are sure you want clear the selected name.
4. Click Yes.
5. Click OK to close the Configure Names dialog box.
6. Click OK on the confirmation message.
Editing names
To edit the name associated with a device, complete the following steps.
1. Select Configure > Names.
The Configure Names dialog box displays.
2. Select All Names from the Display list.
Only devices with a name display. The table displays the Name, WWN, Operational Status,
Type, and a Description of the device.
3. Click the name you want to edit in the Name column.
4. Edit the name and press Enter.
5. Click OK to close the Configure Names dialog box.
6. Click OK on the confirmation message.