Data Center Fabric Manager Enterprise User Manual v10.3.X (53-1001357-01, November 2009)

DCFM Enterprise User Manual 113
53-1001357-01
Exporting names
3
Exporting names
To export the names associated with devices, complete the following steps.
1. Select Configure > Names.
The Configure Names dialog box displays.
2. Click Export.
The Export Files dialog displays.
3. Browse to the location where you want to save the export file.
4. Enter a name for the file and click Save.
5. Click OK to close the Configure Names dialog box.
Importing Names
If the name length exceeds the limitations detailed in the following table, you must edit the name
(in the CSV file) before import. Names that exceed these limits will not be imported. If you migrated
from a previous version, the .properties file is located in the <Install_Home>\migration\data folder.
To import names, complete the following steps.
1. Select Configure > Names.
The Configure Names dialog box displays.
2. Click Import.
The Import Files dialog displays.
3. Browse to the import (.csv) file location.
4. Select the file and click Import.
5. Click OK to close the Configure Names dialog box.
6. Click OK on the confirmation message.
Device Character limit
Fabric OS switch 6.2 or later 30
Fabric OS switch 6.1.X or earlier 15
Fabric OS switch port 32
M-EOS switch 24
M-EOS switch port 24
Others names 128