Manualshelf

Data Center Fabric Manager Enterprise User Manual v10.3.X (53-1001357-01, November 2009)

ManualsBrandsHP ManualsSoftwareHP B-series SAN Network Advisor Software
161162163164165166167168169170
132 DCFM Enterprise User Manual
53-1001357-01
Server port
3
5. Click Apply or OK to save your work.
NOTE
Changes to this option take effect after an application restart.
6. Click OK on the “changes take effect after application restart” message.
Server port
You can configure the server port settings so that you can assign a web server port number and set
the server port to be SSL-enabled.
Configuring the server port
To configure server settings, complete the following steps.
1. Select SAN > Options.
The Options dialog box displays (Figure 49).
FIGURE 49 Options Dialog Box (Server Port option)
2. Select Server Port in the Category list.
3. Select the Enable SSL check box to enable this function for the server port.
4. Enter a port number in the Web Server Port # field.
NOTE
Do not use port 2638 for any of these port numbers. Port 2638 is used internally by the server.