Data Center Fabric Manager Enterprise User Manual v10.3.X (53-1001357-01, November 2009)

DCFM Enterprise User Manual 161
53-1001357-01
Refreshing the server status
4
• Status—The status of the service; for example, started or stopped.
• Start Time—The date and time the service started.
4. Click Close to close the Server Console.
Refreshing the server status
To refresh the server status for each of the Management application services, complete the
following steps.
1. Launch the Server Console.
2. Click the Services tab.
3. Click Refresh to update the table with the latest status of the services in case the services
were stopped or restarted outside of the Server Console.
4. Click Close to close the Server Console.
Stopping all services
To stop all services, complete the following steps.
1. Launch the Server Console.
2. Click the Services tab.
3. Click Stop to stop all services.
Note that clicking Restart stops and then restarts all services.
4. Click Close to close the Server Console.
Starting all services
To start all services, complete the following steps.
1. Launch the Server Console.
2. Click the Services tab.
3. Click Start to start all services.
NOTE
If the server is configured to use an external FTP server, the Server Management Console does
not attempt to start the built-in FTP service.
4. Click Close to close the Server Console.