Data Center Fabric Manager Enterprise User Manual v10.3.X (53-1001357-01, November 2009)

DCFM Enterprise User Manual 205
53-1001357-01
Adding thresholds
5
• Hour—the port is blocked as soon as the specified number of protocol errors allowed is
reached within a hour.
• Day—the port is blocked as soon as the specified number of protocol errors allowed is
reached within a day.
7. Click OK to add the protocol errors threshold to the table and close the Add Protocol Error
Threshold dialog box.
To assign this threshold to fabrics, switches, or switch ports, refer to “Assigning thresholds” on
page 207.
8. Click OK on the Port Fencing dialog box.
Adding a State Change threshold
NOTE
This threshold is only available for Fabric OS devices.
To add an State Change threshold, complete the following steps.
1. Select Configure > Port Fencing.
The Port Fencing dialog box displays (Figure 78).
FIGURE 85 Port Fencing Dialog Box
2. Select State Change (FOS only) from the Violation Type list.
3. Click Add.
The Add State Change Threshold dialog box displays.
4. Enter a name for the threshold in the Name field.
5. Select one of the following options: