Data Center Fabric Manager Enterprise User Manual v10.3.X (53-1001357-01, November 2009)

DCFM Enterprise User Manual 213
53-1001357-01
Editing thresholds
5
Editing a Link Reset threshold
NOTE
This threshold is only available for Fabric OS devices.
To edit a Link Reset threshold, complete the following steps.
1. Select Configure > Port Fencing.
The Port Fencing dialog box displays.
2. Select Link Reset (FOS only) from the Violation Type list.
3. Select the threshold you want to change and click Edit.
The Edit Link Reset Threshold dialog box displays.
FIGURE 91 Edit Link Reset Threshold Dialog Box
4. Change the name for the threshold in the Name field, if necessary.
5. Select one of the following options:
• Default—Uses device defaults. Go to step 8.
• Custom—Uses your selections. Continue with step 6.
6. Change the number of port events allowed for the threshold in the Threshold field, if
necessary.
7. Change the time period for the threshold from the errors per list, if necessary.
8. Click OK on the Edit Link Reset Threshold dialog box.
If the threshold has already been assigned to ports, an “Are you sure you want to make the
requested changes to this threshold on “X” ports?” message displays. Click OK to close.
To assign this threshold to fabrics, switches, or switch ports, refer to “Assigning thresholds” on
page 207.
9. Click OK on the Port Fencing dialog box.