Data Center Fabric Manager Enterprise User Manual v10.3.X (53-1001357-01, November 2009)

DCFM Enterprise User Manual 223
53-1001357-01
Refreshing the port connectivity view
5
Refreshing the port connectivity view
To obtain configuration changes that occurred since the Port Connectivity View dialog box opened,
click Refresh.
Enabling a port
To enable a port from the port connectivity view, right-click the port you want to enable from the
Port Connectivity View dialog box and select Disable/Enable Port > Enable.
Disabling a port
To disable a port from the port connectivity view, right-click the port you want to disable from the
Port Connectivity View dialog box and select Disable/Enable Port > Disable.
Switch Routing Policy Whether a routing policy, for example, port-based routing policy,
is enabled.
Switch Secure Mode Whether switch secure mode is enabled.
Switch Status The operational status. There are four possible operation
status values:
• Up - Operation is normal.
• Down - The port is down or the route to the remote
destination is disabled.
• Disabled - The connection has been manually disabled.
• Backup Active - The backup TCP port is active due to a
failover.
Switch Supplier Serial Number The serial number of the switch supplier.
Switch Version The switch’s version number.
Tag The tag number of the port.
Unit Type The switch unit type.
User Port Number The port number of the user’s device.
Vendor The hardware vendor’s name.
TABLE 12 Port connectivity properties
Field Description