Data Center Fabric Manager Enterprise User Manual v10.3.X (53-1001357-01, November 2009)

DCFM Enterprise User Manual 235
53-1001357-01
Enabling port auto disable on individual ports
5
• Port Type—Displays the port type.
• Port Number—Displays the port number.
• Port WWN—Displays the port world wide name.
• Port Name—Displays the port name.
• User Port #—Displays the user port number.
• PID—Displays the port identifier.
• Connected Port #—Displays the connected port number.
• Connected Port WWN—Displays the connected port world wide name.
• Connected Port Name—Displays the connected port name.
3. Click OK on the Port Auto Disable dialog box.
Enabling port auto disable on individual ports
NOTE
The device must be running Fabric OS 6.3 or later.
1. Select Configure > Port Auto Disable.
The Port Auto Disable dialog box displays.
2. Select the fabric on which you want to enable port auto disable (PAD) from the Fabric list.
3. Choose one of the following options from the Show list to filter the port list:
• All Ports (default)—Displays all ports in the fabric.
• Disabled PAD—Displays only ports where PAD is enabled.
4. Select the ports on which you want to enable PAD.
5. Click Enable PAD.
6. Click OK on the Port Auto Disable dialog box.
Enabling port auto disable on all ports on a device
NOTE
The device must be running Fabric OS 6.3 or later.
1. Select Configure > Port Auto Disable.
The Port Auto Disable dialog box displays.
2. Select the fabric on which you want to enable port auto disable (PAD) from the Fabric list.
3. Select All Ports from the Show list.
4. Select the device on which you want to enable PAD on all ports.
5. Click Enable PAD.
6. Click OK on the Port Auto Disable dialog box.