Data Center Fabric Manager Enterprise User Manual v10.3.X (53-1001357-01, November 2009)

248 DCFM Enterprise User Manual

53-1001357-01

Configuring the failure data capture FTP server

NOTE

Upload Failure Data Capture is only supported on Fabric OS devices.

1. Select Monitor > Technical Support > Upload Failure Data Capture.

The Upload Failure Data Capture dialog box displays.

2. Select a device from the Available Switches with Upload Failure Data Capture Enabled table.

3. Click Change FTP Host.

The Change FTP Server dialog box displays.

FIGURE 103 Change FTP Server dialog box

4. Choose one of the following options:

• Select the Use <Management_Application> option to use the Management application

FTP server.

• Select the Custom option and complete the following steps to configure a FTP server for

the selected device.

a. Enter the server’s IP address in the Host IP field.

c. Enter a user name for the server in the User Name field.

d. Enter a password for the server in the Password field.

e. Enter the path to where the trace dump data is saved in the Directory Path field.

5. Click Test to test the server credentials.

6. Click OK on the Change FTP Host dialog box.

7. Click OK on the Upload Failure Data Capture dialog box.

8. Click OK on the confirmation message, if necessary.