Data Center Fabric Manager Enterprise User Manual v10.3.X (53-1001357-01, November 2009)

6 DCFM Enterprise User Manual
53-1001357-01
Menu bar
1
CEE. Select to manage a CEE switch, port, or link
aggregation group (LAG).
FCoE. Select to manage an FCoE port.
Firmware Management. Select to download firmware
to devices.
Routing. Select to manage a selected router.
Configuration. Select to view the R_Ports on a router.
Domain IDs. Select to configure the router domain IDs.
Logical Switches. Select to configure logical switches
for your SAN.
Encryption. Select to configure encryption for your
SAN.
Zoning. Select to configure zones.
Fabric. Select to configure fabric zones.
LSAN. Select to configure LSAN zones.
Set Change Limits. Select to set zone limits for zone
activation.
Names. Select to provide familiar simple names to
products and ports in your SAN.
FCIP Tunnels. Select to connect to remote fabrics.
High Integrity Fabric. Select to activate the following on
M-EOS and Fabric OS devices:
• On M-EOS switches, HIF activates fabric binding,
switch binding, insistent domain ID and RSCNs.
• On Fabric OS switches, HIF activates SCC policy,
sets Insistent Domain ID and sets Fabric Wide
Consistency Policy for SCC in tolerant mode.
Fabric Binding. Select to configure whether switches
can merge with a selected fabric, which provides
security from accidental fabric merges and potential
fabric disruption when fabrics become segmented
because they cannot merge.
Port Fencing. Select to configure port fencing to protect
your SAN from repeated operational or security
problems experienced by ports.
Port Auto Disable. Select to configure port auto disable
flag on individual FC_ports or all ports on a selected
device, as well as unblock currently blocked ports.
FICON. Select to configure FICON.
Configure Fabric. Select to configure cascaded FICON
from the selected fabric.
Merge Fabrics. Select to merge the selected fabrics.
Menu Command Command Options