Data Center Fabric Manager Enterprise User Manual v10.3.X (53-1001357-01, November 2009)

418 DCFM Enterprise User Manual
53-1001357-01
Assigning a CEE map to a port or link aggregation group
13
Assigning a CEE map to a port or link aggregation group
A port can have either a CEE map or a Traffic Class map assigned to it, but it cannot have both.
1. Select Configure > CEE Switch > CEE from the menu bar.
The CEE Configuration dialog box displays, showing the status of all CEE-related hardware and
functions.
2. Select a port or LAG, and click Edit.
3. Click the QoS tab on the Edit Port dialog box.
The QoS dialog box displays.
FIGURE 160 QoS, Assign a CEE Map to a port dialog box
4. Click the Assign a map to <port name> check box.
If you do not enable this check box, all QoS edit features are disabled.
5. Select CEE Map in the Map Type list.
6. Select a CEE Map in the Available CEE Maps list.
7. Click OK to commit the map assignment.
The CEE Confirmation and Status dialog box displays.
8. Review the changes carefully before you accept them.
9. Click Start to apply the changes, or click Close to abort the operation.