Data Center Fabric Manager Enterprise User Manual v10.3.X (53-1001357-01, November 2009)

420 DCFM Enterprise User Manual
53-1001357-01
Deleting a traffic class map
13
Deleting a traffic class map
1. Select Configure > CEE Switch > CEE from the menu bar.
The CEE Configuration dialog box displays, showing the status of all CEE-related hardware and
functions.
2. Select a switch, and click Edit.
3. Click the QoS tab on the Edit Switch dialog box.
The QoS dialog box displays.
4. Select a Traffic Class Map that you want to delete from the Traffic Class Maps table.
5. Click Delete.
The Delete confirmation dialog displays.
6. Click Yes to confirm.
The Traffic Class Map row is removed from the table.
7. Click OK.
The CEE Confirmation and Status dialog box displays.
8. Review the changes carefully before you accept them.
9. Click Start to apply the changes, or click Close to abort the operation.
Duplicating a traffic class map
1. Select Configure > CEE Switch > CEE from the menu bar.
The CEE Configuration dialog box displays, showing the status of all CEE-related hardware and
functions.
2. Select a switch, and click Edit.
3. Click the QoS tab on the Edit Switch dialog box.
The QoS dialog box displays.
4. Select a Traffic Class Map that you want to duplicate from the Traffic Class Maps table.
5. Click Duplicate.
An input dialog pops up if the duplicated map exceeds the maximum length.
If the map does not exceed the maximum length, a copy of the selected row is created named
<name of Traffic Class Map>_copy.
6. Click OK.
The CEE Confirmation and Status dialog box displays.
7. Review the changes carefully before you accept them.
8. Click Start to apply the changes, or click Close to abort the operation.