Manualshelf

Data Center Fabric Manager Enterprise User Manual v10.3.X (53-1001357-01, November 2009)

ManualsBrandsHP ManualsSoftwareHP B-series SAN Network Advisor Software
511512513514515516517518519520
DCFM Enterprise User Manual 477
53-1001357-01
Saving the public key certificate
16
• HA Cluster Name - the name of the HA cluster (for example, Cluster1), if in an HA configuration.
The name can have a maximum of 31 characters. Only letters, digits, and underscores are
allowed.
• Media Type - the media type of the encryption engine. Possible values are Disk and Tape.
• System Card - the current status of system card information for the encryption engine.
(registered or not registered).
Saving the public key certificate
To save the certificate to a file in PEM format, complete the following steps.
1. Click Save As.
The Save dialog box displays.
2. Browse to the location where you want to save the certificate.
3. Click Save.
You can now load the file into the key vault using the key vault’s tools.
Enabling the encryption engine state
To enable the encryption engine state, complete the following steps.
1. Select Enabled from the Set State To list.
2. Click OK.
Disabling the encryption engine state
To disable the encryption engine state, complete the following steps.
1. Select Disabled from the Set State To list.
2. Click OK.