Data Center Fabric Manager Enterprise User Manual v10.3.X (53-1001357-01, November 2009)

492 DCFM Enterprise User Manual
53-1001357-01
Creating a new encryption group
16
6. Enter an Encryption Group Name for the encryption group (the maximum length of the group
name is 15 characters; letters, digits, and underscores are allowed) and select the Automatic
failback mode.
NOTE
If the name you enter for the encryption group already exists, a pop-up warning message
displays. Although unique group names avoid confusion while managing multiple groups, you
are not prevented from using duplicate group names. Click Yes to use the same name for the
new encryption group, or click No to enter a new, unique name.
7. Click Next.
The Select Key Vault dialog box displays.
FIGURE 199 Select Key Vault dialog box
8. Select the Key Vault Type. The choices are the following:
- RKM - RSA Key Manager
- LKM - NetApp Link Key Manager
- SKM - HP Secure Key Manager
- NCKA - Thales Encryption Manager for Storage (TEMS)
9. Enter the IP address or host name for the primary key vault.
When a new key vault IP address or host name is entered, you must also enter the name of the
file that holds the primary key vault’s public key certificate (or browse to the location by clicking
the Browse button).
10. Enter the name of the file holding the primary key vault’s public key certificate.
If you are using a backup key vault, also enter the IP address or host name, and the name of
the file holding the backup key vault’s public key certificate in the fields provided.