Data Center Fabric Manager Enterprise User Manual v10.3.X (53-1001357-01, November 2009)

520 DCFM Enterprise User Manual

53-1001357-01

Saving a master key to a key vault

Use the following procedure to save the master key to a key vault.

1. Select Configure > Encryption from the menu bar.

The Encryption Center dialog box displays.

2. Select an encryption group from the tree, and click Properties.

3. Select the Security tab.

4. Select Backup Master Key as the Master Key Action.

The Backup Master Key for Encryption Group dialog box displays.

FIGURE 224 Backup Destination (to key vault) dialog box

5. Select Key Vault as the Backup Destination.

6. Enter the passphrase, which is required for restoring the master key. The passphrase can be

between eight and 40 characters, and any character is allowed.

7. Re-type the passphrase for verification.

8. Click OK.

A dialog box displays that shows the Key ID.

9. Store both the Key ID and the passphrase in a secure place. Both will be required to restore the

master key in the future. (The Key ID identifies the storage location in the key vault.)

10. Click OK after you have copied the key ID.