Data Center Fabric Manager Enterprise User Manual v10.3.X (53-1001357-01, November 2009)

522 DCFM Enterprise User Manual
53-1001357-01
Saving a master key to a smart card set
16
FIGURE 225 Backup Destination (to smart cards) dialog box
5. Select A Recovery Set of Smart Cards as the Backup Destination.
6. Enter the recovery card set size.
7. Insert the first blank card and wait for the card serial number to appear.
8. Run the additional cards needed for the set through the reader. As you read each card, the
card ID displays in the Card Serial# field. Be sure to wait for the ID to appear.
9. Enter the mandatory last name and first name of the person to whom the card is assigned.
10. Type a Card Password.
11. Re-type the password for verification.
12. Record and store the password in a secure location.
13. Click Write Card.
The dialog box prompts you to insert the next card, up to the number of cards specified in
step 6.
14. Repeat step 7 through step 13 for each card.
15. Continue until you have written to all the cards in the set.
16. After the last card is written, click OK in the Master Key Backup dialog box to finish the
operation.