Data Center Fabric Manager Enterprise User Manual v10.3.X (53-1001357-01, November 2009)

DCFM Enterprise User Manual 569

53-1001357-01

Rolling back changes to the zone database on the fabric

Use this procedure to reverse changes made to a zone database.

1. Select Configure > Zoning > Fabric.

The Zoning dialog box displays.

2. Select the zone database you want to roll back from the Zone DB list.

You must select an offline zone database that has a value in the Last Saved to Fabric column.

You cannot roll back changes for zone databases that were never saved to the fabric.

3. Select Roll Back from the Zone DB Operation list.

The selected zone database reverts back to what it was before the changes were applied.

4. Click OK to save your work and close the Zoning dialog box.

LSAN zoning

LSAN zoning is available only for backbone fabrics and any directly connected edge fabrics. A

backbone fabric is a fabric that contains an FCR. All discovered backbone fabrics have the prefix

LSAN_ in their fabric name, which is listed in the Zoning Scope list.

Configuring LSAN zoning

The following procedure provides an overview of the steps you must perform to configure LSAN

zoning.

Note that for any zoning-related procedure, changes to a zone database are not saved until you

click OK or Apply on the Zoning dialog box.

1. Select Configure > Zoning > LSAN Zoning (Device Sharing).

The Zoning dialog box displays.

2. Click the Zone DB tab if that tab is not automatically displayed.

3. If you want to show all edge fabrics in your backbone fabric in the Potential Members list,

right-click a device and select Table > Expand All.

4. Create the desired LSAN zones.

For specific instructions, refer to “Creating a new LSAN zone” on page 570.

5. Add members to each zone.

For specific instructions, refer to “Adding members to the LSAN zone” on page 571.

NOTE

You cannot add an LSAN zone to a zone configuration.

6. Click Activate.

The Activate LSAN Zones dialog box displays.

7. Review the information in this dialog box.