Data Center Fabric Manager Enterprise User Manual v10.3.X (53-1001357-01, November 2009)

DCFM Enterprise User Manual 583
53-1001357-01
Deleting a zone alias
18
4. Select one or more zones in the Zones list that you want to delete, then right-click and select
Delete.
A message box displays asking you to confirm the deletion.
5. Click Yes to delete the selected zone.
The message box closes and, if successful, the zone or zones are removed from the Zones list.
NOTE
If you select “Do not show me this again.” on the confirmation message box, the next time you
delete a zone, the zone is deleted without requesting confirmation from you. If you delete
something in error, click Cancel on the Zoning dialog box to exit without saving changes since
the last operation (Apply or Activate). When you reopen the dialog, the zone is restored.
6. Click OK or Apply to save your changes.
A message displays informing you that any zones or zone configurations you have changed will
be saved in the zone database, and warning you to make sure no other user is making changes
to the same areas.
Deleting a zone alias
Use this procedure to delete a zone alias.
1. Select Configure > Zoning > Fabric.
The Zoning dialog box displays.
2. Click the Zone DB tab if that tab is not automatically displayed.
3. Select Alias from the Type list.
4. Right-click the zone alias you want to delete and select Delete.
5. Click Yes on the confirmation message.
To selected zone alias is deleted from the Alias list.
6. Click OK or Apply on the Zoning dialog box to save your changes.
Deleting a zone configuration
Use this procedure to delete a zone configuration.
1. Select Configure > Zoning > Fabric.
The Zoning dialog box displays.
2. Click the Zone DB tab if that tab is not automatically displayed.
3. Select an FC fabric from the Zoning Scope list.
This identifies the target entity for all subsequent zoning actions and displays the zoning
database for the selected entity.
4. Select one or more zone configurations in the Zone Configs list that you want to delete, then
right-click and select Delete.
A message box displays asking you to confirm the deletion.