Data Center Fabric Manager Enterprise User Manual v10.3.X (53-1001357-01, November 2009)

584 DCFM Enterprise User Manual
53-1001357-01
Deleting an offline zone database
18
5. Click Yes to delete the selected zone configuration.
The message box closes and, when successful, the selected zone configurations are removed
from the Zone Configs list.
NOTE
If you select “Do not show me this again.” on the confirmation message box, the next time you
delete a zone configuration, it will be deleted without requesting confirmation from you. If you
delete something in error, click Cancel on the Zoning dialog box to exit without saving changes
since the last operation (Apply or Activate). When you reopen the dialog, the zone configuration
is restored.
6. Click OK or Apply to save your changes.
A message displays informing you that any zones or zone configurations you have changed will
be saved in the zone database, and warning you to make sure no other user is making changes
to the same areas.
Deleting an offline zone database
Use this procedure to delete a offline zone database.
1. Select Configure > Zoning > Fabric.
The Zoning dialog box displays.
2. Select an FC fabric from the Zoning Scope list.
This identifies the target entity for all subsequent zoning actions and displays the zoning
databases for the selected entity.
3. Select the offline zone database you want to delete in the Zone DB list.
NOTE
Only offline databases can be deleted.
4. Select Delete from the Zone DB Operation list.
5. Click Yes on the confirmation message.
The message box closes and, when successful, the selected zone configurations are removed
from the Zone Configs list.
6. Click OK to save your work and close the Zoning dialog box.
A message displays informing you that any zones or zone configurations you have changed will
be saved in the zone database, and warning you to make sure no other user is making changes
to the same areas.