Data Center Fabric Manager Enterprise User Manual v10.3.X (53-1001357-01, November 2009)

588 DCFM Enterprise User Manual

53-1001357-01

Finding a zone member in the potential member list

4. If you want to show all fabrics discovered in the Potential Members list, right-click in the

Potential Members list and select Display All.

5. Select the device or port you want to find in the Potential Members list.

Press SHIFT or CTRL and click each zone to select more than one zone.

6. Click Find > between the Potential Members list and Zones list.

- If the member is found, all instances of the zone member found are highlighted in the

Zones list.

- If the member is not found, a message displays informing you of this. Click OK to close the

message box.

Finding a zone member in the potential member list

Use this procedure to locate a zone member in the Potential Members list on the Zone DB tab.

1. Select Configure > Zoning > Fabric.

The Zoning dialog box displays.

2. Click the Zone DB tab if that tab is not automatically displayed.

3. Select an FC fabric from the Zoning Scope list.

This identifies the target entity for all subsequent zoning actions and displays the zoning

database for the selected entity.

4. Select the zone member in the Zones list that you want to find in the Potential Members list.

Press SHIFT or CTRL and click each zone to select more than one zone.

5. Click Find < between the Potential Members list and the Zones list.

- If the member is found, it is highlighted in the Potential Members list.

- If the member is not found, a message displays informing you of this. Click OK to close the

message box.

- If there are no ports listed in the Potential Members list, a message displays informing you

that additional action is required. Right-click within the list panel and select Port Display

from the shortcut menu to display ports.