Manualshelf

Data Center Fabric Manager Enterprise User Manual v10.3.X (53-1001357-01, November 2009)

ManualsBrandsHP ManualsSoftwareHP B-series SAN Network Advisor Software
621622623624625626627628629630
DCFM Enterprise User Manual 589
53-1001357-01
Finding a zone configuration member in the zones list
18
4. Select the zone you want to find in the Zones list.
Press SHIFT or CTRL and click each zone to select more than one zone.
5. Click Find > between the Zones list and the Zone Configs list.
- If the zone is found, all instances of the zone are highlighted in the Zone Configs list.
- If the zone is not found, a message displays informing you of this. Click OK to close the
message box.
Finding a zone configuration member in the zones list
Use this procedure to locate a zone configuration member in the Zones list on the Zone DB tab.
1. Select Configure > Zoning > Fabric.
The Zoning dialog box displays.
2. Click the Zone DB tab if that tab is not automatically displayed.
3. Select an FC fabric from the Zoning Scope list.
This identifies the target entity for all subsequent zoning actions and displays the zoning
database for the selected entity.
4. Select the zone configuration member (i.e., the zone) in the Zone Configs list that you want to
find in the Zones list.
Press SHIFT or CTRL and click each zone to select more than one zone.
5. Click Find < between the Zones list and the Zone Configs list.
- If the zone is found, it is highlighted in the Zones list.
- If the zone is not found, a message displays informing you of this. Click OK to close the
message box.
Listing zone members
Use this procedure to identify the zone in the active zone configuration of the fabric to which an
individual port belongs and the WWN zone members in that zone.
Note that the procedure is performed from the main view of the Management application.
1. On the product device list of the Management application, expand the list of products to show
the ports.
2. Select a port and select Configure > List Zone Members.
Keep in mind that only attached device ports can be zoned. If desired, select another port.
If the port is not a member of a zone, a message displays informing you of this. Click OK to
close the message.
If the port is a member of a zone, the List Zone Members dialog box displays. The fabric’s
name, the port’s name, and the WWN zone members display.
3. Click Close to exit the List Zone Members dialog box.